How the distributor works

Distributor in the underfloor heating system is mainly responsible for underfloor heating loop in the water flow on and off, when the gas boiler in the water through the main pipe into the manifold, through the filter will be impurities isolation, and then the water will be balanced distribution of the loop, after the heat exchange back to the collector back to the main bar, and then by the return of the mouth of the inflow of the heating system.
The experiments utilised the constant boiling mixture distillation method, using a water separator to remove the water generated by the reaction of the organic layer above the water layer constantly flowing back into the reaction bottle. Prior to the experiment, Xml of water was drained from the water separator after adding water to the branch i.e. (V-X) ml of water was present in the separator. Begin to small fire heating, keep the liquid in the bottle slightly boiling, began to reflux, control a certain (experimental temperature), to be the water distributor has all been filled with water when the reaction has been basically completed, stop heating. Mainly used in chemical experiments to separate the water generated by chemical reactions, due to chemical reactions generated by water in the presence of water in the reaction system will cause certain effects on the reaction or so that the reaction can not be carried out, the need to generate the water through the solvent reflux with water azeotropic to bring out the water, so that the reaction can be carried out, usually with toluene and water azeotropic to take away the reaction of the water generated.

SAF Coolest v1.3.1.2 设置面板JTFSX-AUFU-ZSZAE-XSW

图片ALT信息： YUHUAN BAIMAN

victor.chen@kdmagnet.com